advanced_hpc_logo
phone
request_a_quote
       
 
   
   
  greenbulletHigh Performance Computing  
bar
 
  greenbulletStorage Solutions  
bar
 
  greenbulletCloud Infrastructure  
bar
 
  greenbullet High Performance Servers  
    bulletdownwhite Rackmount Servers  
      bulletwhite1U Rackmount Servers  
      bulletdownwhite 2U Rackmount Servers  
        6028R-WTR  
        6028R-TDWNR  
        6027R-TRF  
        6027R-3RF4+  
        6027B-URF  
        6027AX-TRF-HFT2  
        6027AX-TRF-HFT1  
        6027AX-TRF  
        6027AX-72RF-HFT2  
        6027AX-72RF-HFT1  
        6027AX-72RF  
        5028R-WR  
        5027R-WRF  
        216BAC-R920LPB  
        213A-R900UB  
        2042G-TRF  
        2042G-6RF  
        2027R-N3RF4+  
        2022G-URF4+  
        2022G-URF  
        R2304LH2HKC  
        R2208LT2HKC4  
        R2208GZ4GC  
        B8236G70W8HR-HE-IL  
      bulletwhite3U Rackmount Servers  
      bulletwhite4U Rackmount Servers  
      bulletwhiteTwin Solutions  
      bulletwhiteSAS 3.0 12Gbps Solutions  
      bulletwhiteMulti-processor Solutions  
      bulletwhiteData Center Optimized
     Solutions
 
      bulletwhiteUltra Servers  
      bulletwhiteX10 Haswell Servers  
    bulletwhiteGPU Computing  
    bulletwhiteWorkstations  
    bulletwhiteEnterprise Computing  
    bulletwhiteX10 Solutions  
bar
 
  greenbulletData Storage  
bar
 
  greenbulletNetworking and Infrastructure  
bar
 
  greenbulletSupport  
bar
 
  greenbulletCompany Information  
bar
 
  greenbulletGovernment & Education  
   
   
 
Supermicro 2026TT-H6IBQRF Quad
 
   
2026TT-H6IBQRF

 

Features

Four Hot-Pluggable Systems (Nodes) in a
2U Form Factor. Each Node Supports the Following:

intel  

 

  • Intel® Xeon® 5600/5500 procesor series, with QPI up to 6.4 GT/s
  • Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • One (x16) PCI-E 2.0 (Low Profile)
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Six 2.5" SAS Hot-Swap Drive Bays
  • 1400W Gold-Level High-Efficiency
    Redundant Power Supply
  • Mellanox ConnectX QDR Infiniband
    40Gbps Controller w/ QSFP Connector
 
   Specifications
 
 
 Processor/Cache
 CPU
  • Dual 1366-Pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon®
    processor(s) of the same type below:  
  • Intel® Xeon® Processor X5600/E5600/L5600
    Series (Westmere) 40W - 95W

  • Intel® Xeon® Processor X5500/E5500/L5500
    Series (Nehalem-EP) 38W - 95W

   NOTE: Support Processors with Max TDP < 100W

line
 QPI
  • up to 6.4 GT/s
line
 
 System Memory
 Memory Capacity
  • Twelve 240-Pin DIMM Sockets
  • Supports up to 192GB 1333 / 1066 / 800MHz DDR3 ECC Registered Memory
  • Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered Memory
  • Memory Mirroring Supported
line
 Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-Pin Gold-Plated DIMMs
line
 DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
line
 Memory Voltage
  • 1.5 V
line
 Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
line
 
 On-Board Devices (Per Node)
 Infiniband
  • Mellanox ConnectX QDR Infiniband 40Gbps Controller
line
 Chipset
  • Intel® 5520 (Tylersburg) Chipset
  • ICH10R + IOH-36D
line
 SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 Support
line
 SAS
  • LSI 6Gbps SAS 2108 w/ Hardware RAID support via BPN-ADP-SAS2-H6iR
  • RAID 0, 1, 10, 5, 50, and 6 support
line
 IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with Virtual Media over LAN and KVM-Over-LAN Support
  • Winbond® WPCM450 BMC
line
 Network Controllers
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 Output
  • One Realtek RTL8201N PHY (Dedicated IPMI)
line
 Graphics
  • Matrox G200eW
line
 Super I/O
  • Winbond W83527HG chip
line
 Clock Generator
  • 932S421 chip
line
 
 Input / Output (Per Node)
 Serial ATA
  • Six Serial ATA Ports
  • Six SATA Hard Drives supported
line
 LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN Port
line
 USB
  • Two Rear + One Header (Two Ports)
  • Four Total USB Ports, 2.0 Compliant / 1.1 Compliant
line
 VGA
  • One VGA Port
line
 Serial Port
  • One Fast UART 16550 Serial Port
 
 System BIOS (Per Node)
 BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
line
 BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
line
 
 Form Factor
  • 2U Rackmount
 
  Dimensions
   Height
  • 3.47" (88mm)
line
   Width
  • 17.2" (437mm)
line
   Depth
  • 26.75" (679mm)
line
   Gross Weight
  • 85 lbs (38.6 kg)
line
   Available Colors
  • Black
line
 
 Front Panel (Per Node)
 Buttons
  • Power On/Off button
  • UID button
line
 LEDs
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)
line
 
 Expansion Slots (Per Node)
 PCI-Express
  • One (x16) PCI-E (Low Profile)
 
 Drive Bays (Per Node)
  • Six 2.5" Hot-Swap Drive Bays
 
 Hard Drive Backplane
  • 2U Hard drive Backplane
 
 System Cooling
  • Four Cooling Fans
 Power Supply
  • 1400W high-efficiency (1+1) redundant power supply with PMBus
line
 AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
line
 DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
line
 With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
line
 Certification
80Plus Gold
 
Gold Certified
[ Test Report ]
line
 
 PC Health Monitoring
 CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
line
 Fan
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
line
 Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
line
 LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
line
 Other Features
  • SDDC Support
line
 
 Operating Environment / Compliance
 RoHS
  • RoHS Compliant
line
 Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C
    (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
line
 
   
   
 
   
 



  Home | Products | Support | Company | News | PartnersPrivacy | Contact Us

Last updated 7/29/2015