advanced_hpc_logo
phone
request_a_quote
       
 
   
   
  greenbulletData Storage  
bar
 
  greenbullet Rackmount Servers  
    By Size:  
    bulletwhite1U Rackmount Servers  
    bulletdownwhite 2U Rackmount Servers  
      2122TG-HTRF Quad  
      2122TG-HIBQRF Quad  
      2022TG-HTRF Quad  
      2022TG-HLTRF Quad  
      2022TG-HLIBQRF Quad  
      2022TG-HIBQRF Quad  
      6027R-TRF  
      6027R-3RF4+  
      6027B-URF  
      6027AX-TRF-HFT2  
      6027AX-TRF-HFT1  
      6027AX-TRF  
      6027AX-72RF-HFT2  
      6027AX-72RF-HFT1  
      6027AX-72RF  
      6026T-URF4+  
      6026T-URF  
      6026T-TF  
      6026T-NTR+  
      6026T-6RFT+    
      6026T-6RF+  
      6026T-3RF  
      5027R-WRF  
      216BAC-R920LPB  
      213A-R900UB  
      2042G-TRF  
      2042G-6RF  
      2027R-N3RF4+  
      2026T-URF4+  
      2026T-6RFT+  
      2026T-6RF  
      2022G-URF4+  
      2022G-URF  
      2022G-URF  
      R2304LH2HKC  
      R2208LT2HKC4  
      R2208GZ4GC  
      B8236G70W8HR-HE-IL  
      TwinPro™ Solutions  
      Twin²® Solutions  
      Twin Solutions  
      Twin³ Solutions  
    bulletwhite3U Rackmount Servers  
    bulletwhite4U Rackmount Servers  
    bulletwhiteFatTwin™ Rackmount Servers  
    bulletwhiteTwinPro™ Solutions  
    bulletwhiteTwin²® Solutions  
    bulletwhiteTwin Solutions  
    bulletwhiteTwin³ Solutions  
           
    By Processor  
    bulletwhiteHyper Speed Solutions  
    bulletwhiteIntel E5-2600 v2  
    bulletwhiteIntel E5  
    bulletwhiteIntel  
    bulletwhiteAMD  
bar
 
  greenbulletEnterprise Computing  
bar
 
  greenbulletVirtualization  
bar
 
  greenbulletHigh Performance Computing  
bar
 
  greenbulletWorkstations  
bar
 
  greenbulletGPU Computing  
bar
 
  greenbulletNetworking and Infrastructure  
bar
 
  greenbulletSupport  
bar
 
  greenbulletCompany Information  
bar
 
  greenbulletGovernment & Education  
   
   
 
Supermicro 2122TG-HIBQRF Quad
 
   
2122TG-HIBQRF

 

Features (Per Node)

Four hot-pluggable systems (nodes) in a
2U form factor. Each node supports the
following:

  • Dual AMD Opteron™ 6000 Series
    (6300 Ready) Processors (Socket G34) Sixteen/Twelve/Eight-Core Ready; HT3.0 Link support
  • Up to 512GB DDR3 Registered ECC
    1600/1333/1066 SDRAM in Sixteen DIMMs
  • One Low-Profile PCI-E 2.0 in x16 Slot
  • Dual-Port GbE LAN Controller, Four USB 2.0 Ports, One Dedicated LAN for System Management (IPMI 2.0)
  • Six Hot-Swap SATA Drive Bays
  • Mellanox ConnectX-2 QDR Infiniband 40Gbps Controller w/ QSFP Connector
  • 1400W High-Efficiency Redundant
    Power Supplies; Gold Certified
amd  
 
 
   Specifications
 
 
 Processor/Cache
 CPU
  • Dual 1944-Pin Socket G34
  • Supports up to Two Sixteen/Twelve/Eight-Core Ready AMD Opteron™ 6000 Series (6300 Ready) Processors
  • HT3.0 Link Support
line
 Chipset
  • AMD Chipset SR5670 + SP5100
line
 Note
  • Supports 6000 processors with Max ACP 80W
    (TDP 115W)
line
 
 System Memory (Per Node)
 Memory Capacity
  • Sixteen DIMM Sockets
  • Support up to 512GB DDR3 or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 MHz Memory
  • Quad Channel Memory Bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
line
 Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/Non-ECC SDRAM 72-bit, 240-Pin Gold-Plated DIMMs
line
 DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
line
 Memory Voltage
  • 1.35V or 1.5V
line
 Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory
line
 
 On-Board Devices (Per Node)
 SATA
  • AMD SP5100 (RAID 0, 1, 10)
line
 IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with Virtual Media over LAN and KVM-Over- LAN Support
  • Winbond® WPCM450 BMC
line
 Infiniband
  • Mellanox ConnectX-2 QDR Infiniband 40Gbps Controller
line
 Network Controllers
  • Intel® 82576 Controller, Dual-Port
    Gigabit Ethernet
  • 10/100/1000BASE-T Support
line
 VGA
  • Matrox G200 16MB DDR2
line
 Super I/O
  • Winbond 83527 Chip
line
 
 Expansion Slots (Per Node)
  • One PCI-E 2.0 x16
 
 Input / Output (Per Node)
 Serial ATA
  • Six SATA2.0 (3Gb/s) Ports
line
 LAN
  • Two RJ45 Ports
  • One RJ45 Dedicated LAN Supports IPMI
line
 USB
  • Five USB 2.0 Ports
  • Two Rear, Two Header, One Type A
line
 VGA
  • One VGA Port
line
 Serial Port
  • One Fast UART 16550 Serial Port
  • One Serial Port Header
line
 
 System BIOS (Per Node)
 BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
line
 BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
line
 
 Chassis
 Form Factor
  • 2U Twin² Rackmount
 
  Dimensions (Stand-Alone Chassis / Package)
   Height
  • 3.47" (88mm)/ 11.22" (285mm)
line
   Width
  • 17.2" (437mm)/ 26.38" (670mm)
line
   Depth
  • 26.75" (679mm)/ 39.76"(1010mm)
line
   Gross Weight
  • 85 lbs (38.6 kg)
line
   Available Colors
  • Black
line
 
 Front Panel
 Buttons
  • Four Power On/Off button
  • Four UID button
line
 LEDs
  • Four Power status LED
  • Four UID LED
  • Four Network activity LEDs
  • Four System overheat / fan failed / power failed LED
line
 
 Drive Bays
  • Twenty-Four Hot-Swap 2.5" SATA HDD
    (Six for Each Node)
  • Enterprise SATA HDD Only Recommended
 
 System Cooling
  • Four 80mm PWM Cooling Fans
 Power Supply
  • 1400W high-efficiency (1+1) redundant power supply with PMBus
line
 AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
line
 DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
line
 With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
line
 Certification
80plus
  Gold Certified
[ Test Report ]
line
 
 PC Health Monitoring
 CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
line
 Fan
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
line
 Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for Eight Fan connectors
  • I²C Temperature Sensing Logic
line
 LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
line
 
 Operating Environment / Compliance
  • RoHS Compliant
line
 Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
line
 
   
   
 
   
 



  Home | Products | Support | Company | News | PartnersPrivacy | Contact Us

Last updated 12/17/2013