advanced_hpc_logo
phone
request_a_quote
       
 
   
   
  greenbulletRackmount Servers  
bar
 
  greenbulletHigh Performance Computing  
bar
 
  greenbulletStorage Servers  
bar
 
  greenbullet RAID Storage  
    bulletwhite Infortrend RAID  
      Infortrend Product List  
      By Host:  
      bulletwhite 8GB Fibre Channel Host  
      bulletwhite4GB Fibre Channel Host  
      bulletwhiteSAS Host  
      bulletwhiteiSCSI Host  
      bulletwhiteSCSI Host  
      By Drive Type:  
      bulletwhiteSATA Disk Drive  
      bulletwhite Fibre Channel Disk Drive  
        Fibre Channel Product List  
        Fibre to Fibre  
          F16F-R4031  
          F16F-S4031  
          F16F-J4000-R  
        Fibre to Fibre / SATA  
          FF-R4030  
          FF-S4030  
      bulletwhiteSAS Disk Drive  
    bulletwhiteProware  
    bulletwhiteNEC  
    bulletwhiteData Direct Networks  
    bulletwhiteNexSan  
    bulletwhitePromise  
bar
 
  greenbulletTower Servers  
bar
 
  greenbulletGPU Computing  
bar
 
  greenbulletNetwork Attached Storage  
bar
 
  greenbulletBackup  
bar
 
  greenbulletSupport  
bar
 
  greenbulletCompany Information  
bar
 
  greenbulletGovernment & Education  
bar
 
   
   
   
F16F-J4000-R
         
   
 
16bay  
  • Expansion enclosure for Fibre-to-Fibre RAID systems
  • Controllers with loop switches dynamically distribute data to individual disks
  • Highest density, 16 drives in 3U rack space
  • Redundant SBOD controllers
  • Fault-tolerant dual-loop connectivity
  • Two (2) 4G FC ports per controller
  • Diagnostics LED panel
  • Proprietary enclosure service via in-band connections with the managing RAID enclosure

Host-to-drive Interface
SBOD Model
Corresponding RAID Subsystems
Configuration
Form Factor
Model
Max.
Connections

4GB FC to 4GB FC >
F16F-J4000-R
7 + 7 SBODs
Redundant loop-switched controllers
3U rackmount
6 SBODs
6 +7 SBODs
 
Specifications
 
System Components
  • Redundant SBOD controller configurations
  • Fault-tolerant modules interfaced through a common backplane
  • Redundant, hot swappable 530W power supply units
  • Redundant, dual-speed cooling modules
  • LED diagnostic panel
  • Easy-to-use rotary ID switch to set AL_PA
 
Host Interface
  • Two (2) 4G FC ports per controller
  • SES enclosure service via in-band methodology
 
Drive Interface
  • Sixteen (16) hot swappable 4G FC disk drives
 
Management
  • Management of multiple enclosures via RAID firmware and/or through GUI
  • Module status LED indicators:
  • Six (6) on LED panel (1 service LED and 5 status LEDs)
  • Two (2) per drive tray
  • Three (3) per controller module (1 Ready/Failed LED and two (2) Link status LEDs)
  • One (1) per power supply unit
  • Two (2) per cooling module
 
Physical/Electrical
 
Interfaces
  • Host Interface: Two (2) SPF ports per SBOD controller.  
  • Drive Interface: 4G FC
 
Power Supply Module
 
Redundant hot-swappable power supplies with PFC
   Power Requirements
Input Voltage  
  100VAC @ 9A
  240VAC @ 4.5A with PFC (auto-switching)
   Frequency
   47 to 63Hz
   Power Consumption
   530W
 
Cooling Module
 
Two (2) redundant, dual-fan cooling modules
 Specifications 
 Speed
  High or low rotation speed controlled by firmware proactive   mechanisms
Maximum Air Flow
  (each module)
  High speed: 90CFM
  Low speed: 70.7CFM
 
Environmental Specifications
Temperature

Operating: 0° to 40°C (32° F to 104° F)
Non-operating: - 40° to 60°C (-40° F to 140° F)

Relative Humidity
5% to 95% (non condensing - operating and non-operating)
Altitude
Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft
 
Dimensions
  • Chassis without handles: 445(W) x 130(H) x 488.2(D) mm (17.5 x 5.1 x 19.2 inches)
  • Chassis with handles: 482.6(W) x 131(H) x 504.3(D) mm (19 x 5.2 x 19.8 inches)
  • Package: 423(H) x 567(W) x 772(D) mm (16.7 x 22.3 x 30.4 inches)
 
System weight
  • Net weight: 33kg (72.6 pounds)
  • Gross weight: 35kg (77 pounds)
 
Return to top
 
   
 



  Home | Products | Support | Company | News | PartnersPrivacy | Contact Us

Last updated 2/10/2013