Home Shop Supermicro X9DRH-ITF Motherboard

Supermicro X9DRH-ITF Motherboard

SKU: X9DRH-ITF

Featured Product Image

Key Features:

  • Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family
  • Intel® C602 chipset; QPI up to 8.0GT/s
  • Up to 1TB ECC DDR3, up to 1866MHz; 16 DIMM slots
  • Expansion slots: 1 PCI-E 3.0 x16 and 6 PCI-E 3.0 x8
  • Intel® X540 Dual port 10GBase-T
  • 8 SATA2 and 2 SATA3 ports
  • Integrated IPMI 2.0 and KVM with Dedicated LAN
  • 7 USB 2.0 ports (4 rear, 2 via header + 1 Type A)
  • 30-Day Warranty
  • Condition: Refurbished 
Request a Quote

$502.00

Share this product:

Description

Supermicro X9DRH-ITF Motherboard

Product

Manufacturer Part # MBD-X9DRH-ITF

Physical Stats

Form Factor Enhanced E-ATX
Dimensions 12.1" x 13" (30.7cm x 33.2cm)

Processor/Cache

 

CPU

Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
(up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache Up to 30MB
System Bus QPI up to 8 GT/s

System Memory

Memory Capacity 16 240-pin DDR3 DIMM slots
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs

* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
Memory Voltage 1.35V or 1.5V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C602 chipset
AHCI SATA SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SCU SATA SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1 Realtek RTL8201N PHY (dedicated IPMI)
Video Matrox G200eW

Input / Output

AHCI SATA 2 SATA 3.0 ports (6Gb/s)
4 SATA 2.0 ports (3Gb/s)
SCU SATA 4 SATA 2.0 ports (3Gb/s)
LAN 2 RJ45 10GbE LAN ports
1 RJ45 Dedicated IPMI LAN port
USB 7 USB 2.0 ports total
(4 rear + 2 via header + 1 Type A)
Video 1 VGA port
Serial Port / Header
 2 Fast UART 16550 serial COM port
(1 rear & 1 header)
DOM
 1 DOM (Disk on Module) power connector
TPM 1 TPM Header

Expansion Slots

PCI-Express 1 PCI-E 3.0 x16 slot
6 PCI-E 3.0 x8

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers.) 

System BIOS

BIOS Type
 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Management

 Software SuperDoctor® III
Watch Dog
NMI
IPMI 1.5 / 2.0
Power Configurations ACPI / APM Power Management
Power-on mode for AC power recovery